Double Mowers

Mega Cut
KDD Series 861 & 941

About

Stapless regulation of cutting height (from 4,5 cm to 7 cm)
Use of topping plates possible (increases cutting height to 6 cm – 9 cm) or double topping plates (increases cutting height to 8 cm – 12 cm)
High level of ground following
If KDD is used with a front mower, combination forms three swath  rows per drive

Technical Specifications

Working width [m /ft]: 8,60 / 28’2” to 9,40 / 30’10”
Transport width [m / ft]: 3,00 / 9’8’
Transport height [m / ft]: 3,80 / 12’8” to 4,00 / 13’2’’
Swath width [m / ft]: 2 x 1,90 – 2,30 / 2 x 6’3” – 7’7” to 2 x 2,30 – 2,70 / 2 x 7’7” – 8’10”
Necessary hydraulic couplers: 3 x single acting (with panel 1 x single acting)
Working capacity [ha/h / ac/h]: ~ 10,00 / 25,00 to ~ 11,00 / 27,00
Number of discs /knives [pcs.]: 14/28 to 16/32
RPM: 1000
3-point hitch cat.: III
Power demand [HP]: from 130 to 140
Weight [kg / lbs]: 2125 / 4685 to 2290 / 5050
Weight with suspension system [kg / lbs]: 2100 / 4630 to 2190 / 4830
PTO shaft: tractor – mower: no clutch, built-in: with friction overrunning clutch
Double rubber swath guide [pcs.]: 4

Want more information on Samasz Machinery?