KDT Series

KDT Series
260, 300, 340 & 341*

Standard equipment

Stapless regulation of cutting height (from 4,5 cm to 7 cm)
Use of topping plates possible (increases cutting height to 6 cm – 9 cm) or double topping
plates (increases cutting height to 8 cm – 12 cm)
High level of ground following: +/- 30 degrees
Eliminates tedding thanks to application of conditioners – saves time of fodder collection

Technical Specifications

Working width [m /ft]: 2,60 / 8’7” to 3,40 / 11’2”
Transport width [m /ft]: 2,15 / 7’1’’ to 2,20 / 7’2’’
Transport hieght [m /ft]: 3,40 / 11’2’’ to 4,20 /13’8’’
Swath width [m / ft]: 1,20 – 1,80 / 3’11” – 5’11” to 2,30 – 2,80 / 7’7’’-9’2’’
Necessary hydraulic couplers: 1 x single acting
Working capacity [ha/h / ac/h]: ~ 3,00 / ~ 7,40 to ~ 4,00 / ~ 10,00
Number of discs/knives [pcs.]: 6/12 to 8/16
RPM: 540
3-point hitch cat.: II
Power demand [HP]: from 70 to 90
Weight [kg / lbs]: 725/1600 to 825/1820
PTO shaft: tractor – mower: with overrunning clutch

Want more information on Samasz Machinery?